CHINT NVF5 Series User Manual

NVF5 Series User Manual Appendix B Parameter list
Appendix B Parameter list
Items
Description
Function
Code
Parameter Group and Parameter No
Name
Full Name of Parameter
Parameter
Description
Parameter Function Descriptions
Unit
Unit：
Unit Name Unit Name Unit Name
V Voltage A Current ℃
Centigr
ade
mH
Mili
Henry
rpm Speed Ω Ohm
%
Percenta
ge
Hz Hertz kHz
KiloHer
tz
kW Kilowatt ms
Mili
Second
s Second
min Minute H Hour kh
KiloHo
ur
bps
Baud
Rate
/ NA
Default
Parameters Factory Default Seeting
Change
Parameter Change Properties（Changeable or Not/Change Condition
）
○
Parameters are changeable in Stop or Running status
◎
Parameters are changeable in Ready status and Inchangeable in
Running status.
●
Parameters are actual detection value and inchangeable；（ Inverter has
checked the modification attributes of each parameter,which helps
user avoid misoperation）
2、“Parameter decimal” Most of them are decimal（DEC），If the parameter starts with
"0x", it is represented as Hexadecimal.（Such as 0x0000），When editting parameters , the
range of partial bits can be Hexadecimal.（0～F）。
3、“Default Value” It is represented when resetting parameters to factory default, the
value of the parameter is refreshed; but the actual detection value or record value will not
be refreshed.
4、For better protecting parameters setting,
inverter provides password protection
function.See 4.3 Keypad Password Setting.
- 111 -

CHINT NVF5 Series Specifications

General

Brand	CHINT
Model	NVF5 Series
Category	Inverter
Language	English