CHINT NVF5 Series User Manual

NVF5 Series User Manual Chapter 5 Simple Parameter Menu and
Commissioning Process
F0.20
Parameter
Factory
Default
◎
0：No Effect
1：Fault Log Clear
2：Set to Factory Default（
Except
Motor NP
Parameters and
Parameter F7.11）
3 ：
Reset Custom Parameter
Group to Factory Default（Except
Motor NP Parameters and
Parameter F7.11）
4：All Parameter Reset to Factory
Default
5：Back Up Parameters
6：Using Back Up Parameters
7：Saving Back Up Parameters
Note：
Only when you are using
backup parameters,backup
parameter are able to be
saved.Otherwise when power off
then re-power the inverter,except
the updated parameters other
parameters are always initial
value.
0
F2.00 Motor Type ○
0：AC Induction Motor
1：Reserve
2：Reserve
0
F2.01
Motor NP
Power
◎
（0.1 ～ 1000.0） kW
Depend on
motor type
F2.02
Motor NP
Voltage
◎
0V ～ Inverter Rated Voltage
Depend on
motor type
F2.03
Motor NP
Current
◎
（0.1～1000.0）A
Depend on
motor type
F2.04
Motor NP
Frequency
◎
0.01Hz ~ F0.07
Depend on
motor type
F2.05 Motor Poles ◎
2 ～ 24
4
F2.06
Motor NP
RPM
◎
（0～60000）rpm
1430rpm
F2.22
Motor Auto
Tuning
◎
0：No Operation
1：Static Tune
2：Rotate Tune
0
- 35 -

CHINT NVF5 Series Specifications

General

Brand	CHINT
Model	NVF5 Series
Category	Inverter
Language	English