Christ ALPHA 2-4 LDplus - Disinfection of the Drying Chamber and Accessories

Freeze-dryer Alpha 1-4 LDplus
Freeze-dryer Alpha 2-4 LDplus
8 Maintenance and service
Version 11/2006, Rev. 2.2 of 17/10/2016 • sb
63 / 102
Translation of the original operating manual
• Check the material regularly (at least once a month) for
– cracks
– visible damage of the surface
– pressure marks
– signs of corrosion
– other changes.
• Replace any damaged components immediately for your own safety.
• Immediately rinse off the accessories if any liquids that may cause
corrosion come into contact with them.
• Clean the accessories outside the freeze-dryer once a week or
preferably after each use.
Pos: 188 /010 Uni versalmodule/ Leerzeile @ 0\mod_12 02116244500 _0.docx @ 1 14 @ @ 1
Pos: 189 /010 Uni versalmodule/ Leerzeile @ 0\mod_12 02116244500 _0.docx @ 1 14 @ @ 1
Pos: 190 /200 Chris t/360 GT-B A Labor-Pilot ( STANDARDMOD ULE)/080 W artung und Insta ndhaltung/080-0 020 Desi nfektion von Troc knungskammer und Zubehör @ 25\mod_1404 984107851_68. docx @ 184 461 @ 2 @ 1

8.2 Disinfection of the drying chamber and accessories
• Use commercially-available disinfectants such as, for example, Incidur

,
Meliseptol

, Sagrotan

, Buraton

, or Terralin

(available at specialised
trade).
• The freeze-dryers and the accessories consist of various materials. A
possible incompatibility must be considered.
• Before using cleaning or decontamination agents that were not
recommended by us, contact the manufacturer to ensure that such a
procedure will not damage the freeze-dryer.
• Please contact us if you have any queries (see chapter 7.3 - "Service
contact").
DANGER
If dangerous materials (e.g. infectious and pathogenic substances) are
used, the freeze-dryer and accessories must be disinfected.
Pos: 191 /010 Uni versalmodule/ Seitenwechsel @ 0\mod_12 02116244312 _0.docx @ 105 @ @ 1