Operation
4-3
Figure 4-4 Process for Setting Communication Address, Display Backlight & Sound
4.2.3 Storing & Recalling Setting File
Figure 4-5 Menu for Storing & Recalling Setting File
Since the measurement function and parameter setting on the multi-channel power meter is
much more complicate than the single channel power meter, the 66203/66204 Digital Power
Meter provides 10 groups of settings for storing and recalling to facilitate the usage.
1. After the power-on self-test is done, press SETUP and TRIG/ENTER at the same time
to enter into the system menu. Select File and press TRIG/ENTER to confirm it.
2. Use ↑, ↓ key to select store or recall and press TRIG/ENTER to confirm it.
3. For instance, it can select D_FEF to return to the factory default under recall and press
SETUP to return to the measurement screen.
To Next Page
Loading...
