CHTC HT45 - Introduction

INTRODUCTION
1
INTRODUCTION
This manual contains information on systems operation, component
location, and scheduled maintenance procedures, which pertain to
standard and optional equipment on HT 45 Motor Coaches. The
service procedures described and/or recommended in this manual are
effective methods for performing scheduled service or replacement of
components. Other information, which may be needed to supplement
this manual is contained in separate component manufacturer’s
manuals. Specific information about the engine and transmission can
be found in the applicable manufacturer’s operator, service, and
troubleshooting manuals.
SAFETY INSTRUCTIONS
Safety instructions are noted throughout this manual. Each safety
instruction is given as a WARNING or a CAUTION and is accompanied
by a safety symbol as shown below:
WARNING
Failure to observe a safety instruction noted by WARNING could
result in severe injury or death.
CAUTION
Failure to observe a safety instruction noted by CAUTION could
result in injury or damage to the equipment.
NOTE: Used throughout this manual, NOTES provide useful data, but
are never used to communicate safety hazards.