HOW TO USE THIS MANUAL
This manual is divided into nine major sections:
SECTION 1 - FOREWORD
SECTION 2 - INTRODUCTION
SECTION 3 - INSPECTION
SECTION 4 - SAFETY
SECTION 5 - CONTROLS
SECTION 6 - OPERATING
SECTION 7 - MAINTENANCE
SECTION 8 - WARRANTY/CUSTOMER ASSISTANCE
Some of these major sections may be divided into smaller subsections
dealing with specific components and/or operating systems.
NOTE: Some illustrations in this manual were provided courtesy of the
appropriate vendor. Typical illustrations may be used; therefore, minor
illustration differences may exist when compared to actual parts or other
publications.
VEHICLE IDENTIFICATION NUMBER (VIN) PLATES
Motor Coach VIN Plate
The motor coach VIN plate is mounted inside the motor coach to the
driver’s right side at step-well wall. The motor coach plate has the
following information on it: motor coach model, motor coach overall
weight, motor coach code, rated passenger capacity, VIN, chassis
code, manufacturing date and manufacturer.
Second Location for VIN Number
The second VIN number is located front right wheel well chassis frame
of the coach. The VIN has been stamped on the body understructure.
A third is located at passenger side 2
nd
luggage bay at frame.
Engine Plate
The engine plate is located on the center of the engine and to the right
side of the fuel filter. The engine plate has the following information on
it: engine model, engine serial number, and arrangement numbers.
To Next Page
Loading...