NEW MOTOR COACH BREAK-IN
CAUTION
The engine must not be run at its maximum output power during
the break-in period.
In order to maintain the excellent performance and efficiency of the
motor coach, as well as ensure an extended service life.
Pay attention to any unusual noises, vibrations, or handling
characteristics, at all times during break-in period. The mileage for the
break-in period is usually 1,500 miles (2,500 km).
New Motor Coach Preparations
It is advisable to perform the following procedures:
1.
Clean the motor coach.
2.
Check the connections and fasteners of various components.
3.
Check the coolant storage of the cooling system and look for
any leakage.
4.
Check the fluid levels in the engine, the gearbox, the driving
axle and the steering system. If fluids are low, add the
appropriate fluid being careful to not overfill.
5.
Check for any leakage in each system.
6.
Check to see if the brake system is normal and look for any
leakage among the valves and the various pipeline connections.
7.
Check the steering system for loose or blocking parts.
8.
Check tire pressure to ensure proper inflation
To Next Page
Loading...