CIAT XtraConnect 2 - Customer Access Bit

EN - 59
25.4 Customer access bit
Register No.
hexadecimal
Register
No.
decimal
Description Format Type Setting
Registers accessible in read mode (Functions 3 or 4) and write mode (Function 16) (continued)
0x109 and 0x10a 265 and 266 P125.1 Setpoint for 4 mA in cooling mode Float Read/Write
0x10b and 0x10c 267 and 268 P125.2 Setpoint for 4 mA in heating mode Float Read/Write
0x10d and 0x10e 269 and 270 P126.1 Setpoint for 20 mA in cooling mode Float Read/Write
0x10f and 0x110 271 and 272 P126.2 Setpoint for 20 mA in heating mode Float Read/Write
Registers accessible in read mode (Functions 3 or 4) and write mode (Functions 6 or 16)
0x200 512 Year Decimal Read/Write 0 to 99
0x201 513 Month Decimal Read/Write 1 to 12
0x202 514 Day of the month Decimal Read/Write 1 to 31
0x203 515 Day of the week Decimal Read/Write
1 to 7 (1: Monday, 2: Tuesday,
)
0x204 516 Hour Decimal Read/Write 0 to 23
0x205 517 Minute Decimal Read/Write 0 to 59
Hexadecimal bit
No.
Decimal bit
No.
Description Type Setting
Read-only bit (function 1 or 2)
0x01 1 P103 Control mode Read-only 0 : Local, 1=Remote
0x02 2
Operating summary (On/Off and automatic operation
input closed)
Read-only 1 = on
0x03 3 State of pump 1 output Read-only 1 = on
0x04 4 State of pump 2 output Read-only 1 = on
0x05 5 Compressor 1 output state Read-only 1 = on
0x06 6 Compressor 2 output state Read-only 1 = on
0x07 7 Compressor 3 output state Read-only 1 = on
0x08 8 Not used
0x09 9 Not used
0x0a 10 Not used
0x0b 11 Not used
0x0c 12 Not used
0x0d 13 Energy limiter on Read-only 1=on
0x0e to 0x0f reserved
0x10 16 General fault summary (1 fault below present) Read-only 1 = Fault
0x11 17 Phase controller fault Read-only 1 = Fault
0x12 18 Water flow fault (module 1) Read-only 1 = Fault
0x13 19 Pump 1 fault
0x14 20 Pump 2 fault Read-only 1 = Fault
0x15 21 Pump fault, 1 loop Read-only 1 = Fault
0x16 22 Pump fault, 2 loops Read-only 1 = Fault
0x17 23 Heat exchanger inlet sensor fault Read-only 1 = Fault
0x18 24 Heat exchanger outlet sensor fault Read-only 1 = Fault
0x19 25 Outdoor temperature sensor fault Read-only 1 = Fault
0x1a 26 Condenser inlet sensor fault Read-only 1 = Fault
0x1b 27
Manifold outlet sensor fault for machine with 500 kW
module
Read-only 1 = Fault
0x1c 28 Fan fault Read-only 1 = Fault
0x1d 29 EEPROM fault Read-only 1 = Fault
0x1e 30 Loop inlet sensor fault (MULTICONNECT) Read-only 1 = Fault
0x1f 31 Loop outlet sensor fault (MULTICONNECT) Read-only 1 = Fault
0x20 32 AEROCONNECT link fault Read-only 1 = Fault
0x21 33 Outdoor temperature too high in cooling mode Read-only 1 = Fault
0x22 34 Operating mode change fault Read-only 1 = Fault
0x23 35 Winter protection Read-only 1 = Fault
0x24 36 Hydraulic module ambient temperature sensor fault Read-only 1 = Fault
0x25 37
Condenser outlet sensor fault
Read-only 1 = Fault
0x26 38
Outdoor temperature too high in heating mode
Read-only 1 = Fault
0x27 39
External fault
Read-only 1 = Fault
0x28 40
Emergency stop fault
Read-only 1 = Fault
0x29 41
Control sensor fault
Read-only 1 = Fault