Turning Up the System 3-5
3902 Service Delivery Switch Hardware Installation and Start-up Manual
009-3205-001 Standard Revision D
Copyright
©
2013-2015 Ciena
®
Corporation July 2015
The following rules apply when setting a host name:
• String between 2 and 63 characters.
• The host name must not be an IP address.
• No spaces are allowed.
• At least one character must be alpha (a-z) or a dash (-).
• Host name is not case sensitive.
• The following special characters are not allowed: “ % * ? !
For a procedure see “Setting the System Host Name” on page 3-13.
Logging out of the system
When you have completed your initial system configuration, you can log out
of the system and remove the connection to the serial console port.
Note: Before you disconnect from the system, ensure that you have
saved the configuration using the
configuration save command.
For a procedure see “Logging Out of the System” on page 3-14.
To Next Page
Loading...
