Chapter 4 Configuration 49
Bluetooth Menu > Pairing Test
The pairing procedure is for the creation and exchange of a link key between two
Bluetooth-enabled devices. The devices use the link key for future authentication when
exchanging information.
Bluetooth Menu > 5. Pairing Test
1. The mobile computer will first start with making an inquiry so that the system can generate a
list of device(s) that has been discovered nearby.
2. Secondly, select a desired target device.
3. Then, select a Bluetooth service from the “Target Machine” menu. To stop and exit the test,
press [ESC].
Serial Port (SPP)
Access Point (PAN)
DialUp Network (DUN)
4. After pairing successfully, the target device will be added to the Frequent Device List for
quick connection in the future.
Note: During the initial setting of Bluetooth wireless network, the pairing procedure must
be carried out before the Echo tests.
To Next Page
Loading...
