48 8000 Series Reference Manual
5. DUN GPRS
The mobile computer will try to connect to a mobile phone with GPRS
functionality.
1. Pairing with your mobile phone must be completed first. Select “DialUp
Network” for Target Machine options.
2. Run the Echo Test program on your computer. Associated settings include
- Select “TCP/IP – Server” for interface.
- Set Action Mode to “Passive”.
3. Start the echo test on both ends.
4. Enter the server IP on the mobile computer.
5. The mobile computer will connect to your mobile phone that dials up a
GPRS AP, and finally connect to your computer (server) through the GPRS
AP.
6. BNEP Client
Set the mobile computer as a client. Enter the IP address of a server with
which a connection is desired. Then, it will try to connect to an AP.
1. Pairing with an AP must be completed first. Select “Access Point” for
Target Machine options. Note that you must disable Authentication and clear
the preset PIN code when connecting to Bluetooth AP (3560).
2. Run the Echo Test program on your computer. Associated settings include
- Select “TCP/IP – Server” for interface.
- Set Action Mode to “Passive”.
3. Start the echo test on both ends.
4. Enter the server IP and port number on the mobile computer.
7. BNEP Server
Set the mobile computer as a server. It will try to connect to an AP.
1. Pairing with an AP must be completed first. Select “Access Point” for
Target Machine options. Note that you must disable Authentication and clear
the preset PIN code when connecting to Bluetooth AP (3560).
2. Run the Echo Test program on your computer. Associated settings include
- Select “TCP/IP – Client” for interface.
- Enter Remote IP and port number.
- Set Action Mode to “Passive”.
3. Start the echo test on both ends.
To Next Page
Loading...
