48
Wireless Smart Scan User Guide
WEDGE OUTPUT (WI-FI CONNECTION ONLY)
This tabbed page is available when Wi-Fi is set as the wireless connection. Configure
these settings for the collected data to be output to other applications.
Keyboard Type: Click the drop-down menu to select the keyboard type for wedge
output.
Inter-Character Delay: By default, the inter-character delay is set to zero. Specify a
value ranging from 0 to 255 in milliseconds to match the computer response time of the
keyboard interface. Such delay time is inserted between every character being
transmitted. The longer the delay time is, the slower the transmission speed will be.
Add Line-Feed character to each record: Check this checkbox to add a line-feed
character to the end of each record.
Capital/Shift Lock Type: In order to send the alphabet with correct case, the scanner
needs to know the status of Caps Lock on the keyboard. Incorrect settings may result in
reversed case of the alphabet being transmitted.
Normal Normal type
Capital Lock When selected, the keys of alphabetic characters will b
e interpreted as
capital letters. However, this does not affect the number or punctuation
keys.
Shift Lock When selected
, the keys of alphabetic characters will be interpreted as
capital letters. In addition, this affects the number or punctuation keys.
To Next Page
Loading...
Need help?
General
