2.7.4. SHIFT KEYS
The Shift key is located right above the Alpha key for 28-key Model, while it is
located right above the Function Key for 25-key Model. When the Shift key is pressed once,
an icon shows up in the status bar to indicate the Key Status is in Shift Resume Mode.
The keypad will return to the Default Input mode right after pressing any key (except of
Backspace key for 28-key Model and Delete key for 25-key Model).
When the Shift key is pressed twice, the keypad will enter Shift Lock Mode with an icon
appears in the status bar, and the keypad stays in Shift Lock Mode till the Shift key is
pressed again.
In both Shift Resume Mode and Shift Lock Mode, the keys deliver the functions as Key
Functions in Different Modes describes:
To Next Page
Loading...
Need help?
General
