5.3. READ PRINTED BARCODES
Aside from output to destinations as per Keyboard Emulation settings, ReaderConfig
provides a Scan Test feature for quick viewing of decoded data.
To perform test scanning of barcodes:
1) Open ReaderConfig as described in Launch ReaderConfig.
2) On ReaderConfig main screen, tap the more button on the action bar to open the
main menu.
3) Tap on Scan Test. A Test Scan Form opens for displaying the scanned data.
4) Aim the scanning window at the barcode to read and press any of the side trigger. The
scanning light beams to read the printed barcodes. The scanning light goes off once the
data is decoded, or when the decode timeout period has passed.
To Next Page
Loading...
