ADVANCED DATA FORMATTING
Advanced Data Formatting is to customize the decoded data and then output it by rules,
and therefore Advanced Data Formatting rule(s) needs to be created beforehand. A rule
combines “criteria” with “actions” to be performed. If the decoded data meets the “criteria”,
it will be output according to the “actions”.
Please refer to section 5.2.2 “Advanced Data Formatting” for further description.
NOTIFICATION SETTINGS
Notification Settings enables audible, visible and tactile
feedback for scanning good read, which helps notify the
user of a successful decoding.
Enable LED when
good read
Selects to enable/disable LED light (left) for scanning
good read. See Status LED for details.
Enables/disables tactile feedback (vibration) for good
read and sets the duration to vibrate.
Sets the beeper sound for scanning good read. Users can
choose to mute the beeper sound, or configure the
beeper between sounds 1 to 9.
To Next Page
Loading...
