Switch to enable GS1 DataBar-14 decoding.
Strips the leading ‘010’ of GS1 DataBar and converts the
barcode to EAN-13.
Select the security level from Level 0 to Level 3
Switch to enable GS1 DataBar Limited decoding.
Strips the leading ‘010’ of GS1 DataBar Limited and
converts the barcode to EAN-13.
Select the security level from Level 0 to Level 3
Decide whether to include the check digit in the data to
transmit.
Decide whether to transmit the Application ID ("01").
Switch to enable GS1 DataBar Expanded decoding.
Separator Character Enable the function code
character separator, which is used to separate data fields
of variable length and application identifiers of
subsequent data fields in concatenated data strings.
Select the security level from Level 0 to Level 3
Switch to enable Korean 3 of 5 decoding.
Switch to enable MSI decoding.
Sets the length of the MSI symbols to decode.
One Fixed length (Length 1)
Two Fixed lengths (Length 1>Length 2)
Max / Min Length (range: 0-55; Length 1<Length 2)
Any Length