Setting options are Normal and High.
Tramsmit Start/Stop
Character
Select whether to include start/stop characters in the
transmitted data.
Asterisk As Data
Characters
Select whether to use asterisk as the data characters.
Switch to enable Code 93 decoding.
Sets the length of the Code 93 symbols to decode.
One Fixed length (Length 1)
Two Fixed lengths (Length 1>Length 2)
Max / Min Length (range: 0-55; Length 1<Length 2)
Any Length
Switch to enable Code 128 decoding.
Setting options are Normal and High.
Sets the length of the Code 128 symbols to decode.
One Fixed length (Length 1)
Two Fixed lengths (Length 1>Length 2)
Max / Min Length (range: 0-55; Length 1<Length 2)
Any Length
Switch to enable GS1-128 decoding.
Enable the function code character separator, which is
used to separate data fields of variable length and
application identifiers of subsequent data fields in
concatenated data strings.
Tap on to choose your input method between
Keyboard input and Symbol table input to set a separator
character to replace with.
To Next Page
Loading...
Need help?
General
