USE SNAP-ON CABLE
The Snap-on Cable provides a convenient way to charge your mobile computer as well as
data communication.
To install:
1) Remove the micro USB cable if it is connected with the RK25WO mobile computer.
2) Hold the snap-on cup toward the bottom of the RK25WO mobile computer, and place
one of the snap-on cup side to the side of the RK25WO mobile computer.
3) Push the Snap-on cup upwards to make its another side to be attached to the RK25WO
mobile computer.
4) A “click” sound is made once the Snap-on cable is connected with the bottom of the
RK25WO mobile computer in place.
5) Connect the USB plug to the approved adapter for external power connection, or plug it
to the USB port of PC/laptop for data transmission/ charging.
To Next Page
Loading...
