CVM-NRG96
Mn_cvm-nrg_03.doc
Once the required option is selected, press the
key to enter the data and
access the following setting step.
Data Bits
The display shows ”set data bits 8”
SEt
data
bits
8
This menu option is solely for information, because data bits cannot be
changed.
Then press the
key to enter the data and access the following setting
step.
Stop Bits
The display shows “set stop bits 1”
To select one of the two display options, just press the MAX key and the two
options will alternate.
Once the required option is selected, press the
key to enter the data and
access the following setting step.
set
st op
bi t s
1
Set
st op
bi t s
2
To Next Page
Loading...
Need help?
General
