5-7
Cisco 10000 Series Router Troubleshooting Guide
OL-0439-02
Chapter 5 Cisco 10000 Series Router Alarms and Error Messages
Channelized T3 Line Card Alarms and Error Messages
Channelized T3 Line Card Error Messages
Table 5-6 lists the error messages that the channelized T3 line card can generate.
Table 5-6 Channelized T3 Line Card Error Messages
Error Message Corrective Action
LC_ERROR:Slot[x/0] Received %s (%d:%d) command, for invalid t3 %d
from CRE-RP!
In all cases, contact
the Cisco TAC for
assistance.
LC_ERROR:Slot[x/0] Received %s (%d:%d) command, for invalid t3 %d,
t1 %d, from CRE-RP!
LC_ERROR:Slot[x/0] Received %s (%d:%d) command, for t3 %d, invalid
t1 %d, from CRE-RP!\n
LC_ERROR:Slot[x/0] Received %s (%d:%d) command, for invalid t3 %d,
t1 %d chan %d, from CRE-RP!
LC_ERROR:Slot[x/0] ct3_cmd_dispatcher:Unknown command %d!
LC_ERROR:Slot[x/0] c10k_lc_cmd_q timer expired!
LC_ERROR:Slot[x/0] ct3 i960 stats queue timeout!
LC_ERROR:Slot[x/0] Error getting channel stats array pointer
LC_ERROR:Slot[x/0] Error getting message unit array pointer
LC_ERROR:Slot[x/0] request_channel_stats challoc failed!!
LC_WARNING:Slot[x/0] Lunar Pmon data not latched for collection.
T3=%d, T1=%d