Cisco 10000 Series

A-1
Cisco 10000 Series Router Troubleshooting Guide
OL-0439-02
APPENDIX A
Unsupported Commands
Following is a list of the commands that are not supported in IOS release 12.0(9)SL for the
Cisco10000series router:
Unsupported Frame Relay Commands
• FRF.12 fragmentation commands
• FRF.11 VoFR commands
• frame-relay adaptive-shaping {becn | foresight}
• frame-relay bc {in | out} bits
• frame-relay be {in | out} bits
• frame-relay cir {in | out} bps
• frame-relay custom-queue-list list-number
• frame-relay de-group group-number dlci
• frame-relay ip [rtp | tcp] header-compression [passive]
• frame-relay map protocol protocol-address dlci [broadcast] [ietf | cisco] [payload-compress
{packet-by-packet | frf9 stac [hardware-options]}]
• frame-relay map ip ip-address dlci [broadcast] [cisco | ietf] [nocompress] tcp
header-compression {active | passive}
• frame-relay mincir {in | out} bps
• frame-relay traffic-rate average [peak]
• frame-relay traffic-shaping
• show frame-relay ip [rtp | tcp] header-compression [interface]
Unsupported PPP Commands
• compress [predictor | stac | mppc [ignore-pfc]]
• debug ppp cbcp
• ppp bridge appletalk
• ppp bridge ip
• ppp bridge ipx [novell-ether | arpa | sap | snap]
• ppp reliable-link