NIAGARA SCX WEB INTERFACE
NOTE: The SCX Web Interface password is case sensitive.
Then click the Change Password button. You will then be presented with the results in the form of a
dialog box such as the one shown directly below.
NOTE: You will need to log back into the Web Interface with your new password.
Restoring the Login Password to the Factory Default
If you have forgotten or lost your password, you can restore the default password by running the
Restore Factory Defaults option. For more information, see Restore Factory Defaults in the System
Configuration section in the following sections.
Cisco Digital Media Encoder 2000 User Guide 121
To Next Page
Loading...
