TUTORIAL: GETTING TO KNOW YOUR CISCO DIGITAL MEDIA ENCODER 2000
Tutorial: Getting to Know your Cisco Digital Media Encoder
2000
There are two interfaces for operation of your Cisco Digital Media Encoder 2000 streaming media
encoder.
1) The Cisco Digital Media Encoder 2000 front panel LCD display and buttons
2) The Cisco Digital Media Encoder 2000 SCX Web Interface
NOTE: To access the Cisco Digital Media Encoder 2000 SCX Web Interface or the Niagara SCX
Encoder Explorer Software you will need a computer with a current Web browser installed that has
an IP connection to the Cisco Digital Media Encoder 2000 via a local network on which both the
Cisco Digital Media Encoder 2000 and the computer reside or through a direct IP connection using
the included RJ45 cable to connect directly from the Cisco Digital Media Encoder 2000 to a
computer.
This tutorial is divided into two parts; using the front panel of the Cisco Digital Media Encoder
2000 and using the Niagara SCX Web Interface.
Cisco Digital Media Encoder 2000 User Guide 15
To Next Page
Loading...
