TUTORIAL: GETTING TO KNOW YOUR CISCO DIGITAL MEDIA ENCODER 2000
Editing an Encoder Profile
When you create a new encoder, you will be prompted to edit the new profile to your specific
encoder settings and requirements. You can also edit the existing encoder profiles provided by
default on Cisco Digital Media Encoder 2000. The property windows for editing a new encoder or
an existing encoder are identical.
If you have performed the steps for adding an encoder, you should already see the encoder
properties page.
If not, you can edit an existing encoder profile. Go to the All Encoders screen.
Click the Edit link next to the encoder whose properties you wish to modify.
The properties page for that encoder is then displayed.
Video & Audio Settings
Regardless of the encoder type, all types require you set the audio and video properties. These values
are the same for all encoder types except for the added color space setting for AVI and Flash
®
.
Cisco Digital Media Encoder 2000 User Guide 35
To Next Page
Loading...
Need help?
General
