NIAGARA SCX WEB INTERFACE
NOTE: The Custom Setting is not available with the Flash video codec.
NOTE: If you specify a video size incompatible with the color space of your source video, the Cisco
Digital Media Encoder 2000 will automatically correct the size to the closest compatible setting
when you click the Submit button. The color space format setting is only available in AVI and Flash
encoder properties, and appears as an additional field under the Size setting (see below).
Now that you have completed all of the Video and Audio settings, you can proceed to the encoder
type settings at the bottom of the page. As previously stated, these settings will vary according to the
encoder type.
Advanced Streaming Settings
SimulStream and DirectShow Filters
Filters have two interrelated purposes, as follows:
• They allow applications to enumerate and list DirectShow video capture and preview pins or
streams (each with different settings) as named entries in their video device select lists. The
video device driver can be configured to show 1 to 10 filters per device. Each filter has one
preview pin and one capture pin. Standard applications have the capability to access a particular
filter without any custom programming specialized for Osprey devices.
• Each filter has independent settings for cropping, default output size, watermarks, and captions
that can be stored between sessions. Compared with the previous “pin-based” method, no
requirements are necessary for a particular startup order to associate settings with instantiations.
Enable SimulStream Checkbox
Cisco Digital Media Encoder 2000 User Guide 87
To Next Page
Loading...
Need help?
General
