Cisco 2000 User Manual

TUTORIAL: GETTING TO KNOW YOUR CISCO DIGITAL MEDIA ENCODER 2000
After you input the preferred default location in the *Default AV Folder box, you can begin
exporting your files from the Cisco Digital Media Encoder 2000.
Press the <Menu> button to access the Cisco Digital Media Encoder 2000 menu.
Using the UP/DOWN arrow buttons, highlight the Export Files option and press the <Enter>
button.
Then select the To USB Device option and press <ENTER>.
The next screen will ask you to select the drive destination and to provide a list of active USB drives
connected to the Cisco Digital Media Encoder 2000.
Select the USB drive to which you wish to export your file, and then press <ENTER>.
The next screen will ask you to select a source file, i.e., the file you want to export to the USB
device.
Your source file should appear on the following screen. NOTE: The file name on this screen is for
instructional purposes only.
Upon seeing the name of the file you wish to export on the screen shown directly above, press
<ENTER>. You will then see the following screens.
Once the Cisco Digital Media Encoder 2000 is finished exporting the file, you can remove the USB
device.
Cisco Digital Media Encoder 2000 User Guide 21

Cisco 2000 Specifications

General

Brand	Cisco
Model	2000
Category	Media Converter
Language	English