6-3
Cisco Unified IP Phone 6901 and 6911 Administration Guide for Cisco Unified Communications Manager 8.6 (SCCP and SIP)
OL-24582-01
Chapter 6 Monitoring the Cisco Unified IP Phone Remotely
Device Information
Procedure
Step 1 Choose Device > Phone.
Step 2 Specify the criteria to find the phone and click Find, or click Find to display a list of all phones.
Step 3 Click the device name to open the Phone Configuration window for the device.
Step 4 Scroll down to the Product Specific Configuration section.
Step 5 To disable access, from the Web Access drop-down list, choose Disabled.
Step 6 To enable access, from the Web Access drop-down list, choose Enabled.
Step 7 Click Save.
Step 8 Click Apply Config.
Device Information
The Device Information area on a phone’s web page displays device settings and related information for
the phone. Table 6-1 describes these items.
To display the Device Information area, access the web page for the phone as described in the
“Accessing the Web Page for a Phone” section on page 6-1, and then click the Device Information
hyperlink.
Table 6-1 Device Information Area Items
Item Description
MAC Address Media Access Control (MAC) address of the phone
Host Name Unique, fixed name that is automatically assigned to the phone based on its MAC address
Phone DN Directory number assigned to the phone
App Load ID Identifier of the firmware running on the phone
Boot Load ID Identifier of the factory-installed load running on the phone
Hardware Revision Revision value of the phone hardware
Serial Number Unique serial number of the phone
Model Number Model number of the phone
Message Waiting Indicates if there is a voice message waiting on the primary line for this phone
UDI Displays the following Cisco Unique Device Identifier (UDI) information about the phone:
• Device Type—Indicates hardware type. For example, phone displays for all phone models
• Device Description—Displays the name of the phone associated with the indicated model
type
• Product Identifier—Specifies the phone model
• Version Identifier—Represents the hardware version of the phone
• Serial Number—Displays the unique serial number of the phone
To Next Page
Loading...
