Cisco 700 series Administration Guide

What to do next
Modify the Default Headset Configuration File, on page 23
Modify the Default Headset Configuration File
Note the following as you work with the JavaScript Object Notation (JSON) file:
• The settings aren't applied if you are missing a bracket or brackets in the code. Use an online tool such
as JSON Formatter and check the format.
• Set the "updatedTime" setting to the current epoch time or the configuration is not applied.
• Confirm that firmwareName is LATEST or the configurations will not be applied.
• Do not change a parameter name or the setting will not be applied.
Procedure
Step 1 Open the defaultheadsetconfig.json file with a text editor.
Step 2 Edit the updatedTime and the headset parameter values you wish to modify.
A sample script is shown below. This script is provided for reference only. Use it as a guide as you configure
your headset parameters. Use the JSON file that was included with your firmware load.
{
"headsetConfig": {
"templateConfiguration": {
"configTemplateVersion": "1",
"updatedTime": 1537299896,
"reportId": 3,
"modelSpecificSettings": [
{
"modelSeries": "530",
"models": [
"520",
"521",
"522",
"530",
"531",
"532"
],
"modelFirmware": [
{
"firmwareName": "LATEST",
"latest": true,
"firmwareParams": [
{
"name": "Speaker Volume",
"access": "Both",
"usageId": 32,
"value": 7
},
{
"name": "Microphone Gain",
"access": "Both",
"usageId": 33,
Cisco Headset 700 Series Administration Guide
23
Headset Management on Cisco Unified Communications Manager Version 12.5(1) or Older
Modify the Default Headset Configuration File

Cisco 700 series Specifications

General

Wireless	No
Compression	No
WAN Ports	1
Weight	0.48 kg
Power Supply	External
Category	Network Router