Related Topics
Headset Template Management, on page 11
Update Your Headset With the Cisco Headsets App, on page 30
Connect the Cisco Headset 730 to a Bluetooth Device
Put the Cisco Headset 730 into pairing mode to make it discoverable to other devices.
The Cisco Headset 730 can save up to eight different Bluetooth devices and maintain simultaneous connections
with up to two devices at once.
If the headset already has two active Bluetooth sources, you must disconnect one before you can add another
Bluetooth device to the headset.
Note
Procedure
Step 1 Slide up and hold the Power/Bluetooth switch for two seconds until the Bluetooth LED blinks.
Cisco Headset 700 Series Administration Guide
2
About the Cisco Headset 700 Series
Connect the Cisco Headset 730 to a Bluetooth Device
To Next Page
Loading...
Need help?
General
