Cisco 7962G - Ending a Call

Basic Call Handling
Cisco Unified IP Phone 7962G and 7942G for Cisco Unified Communications Manager 6.0 (SCCP and SIP) 19
Tip
If parties on a call hear a beep tone, the call might be monitored or recorded. Ask your system
administrator for more information.
Ending a Call
To end a call, hang up. Here are some more details.
Retrieve a parked call on
another phone
Use Call Park or Directed Call Park. Storing and Retrieving
Parked Calls, page 33
Use your phone to answer a
call ringing elsewhere
Use Call Pickup. Picking Up a Redirected
Call on Your Phone,
page 32
Answer a priority call (SCCP
phones only)
Hang up the current call and press
Answer.
Prioritizing Critical Calls,
page 39
Answer a call on your cellular
phone or other remote
destination
Set up Mobile Connect and answer
your phone.
When you enable Mobile Connect:
• Your desktop and remote
destinations receive calls
simultaneously.
• When you answer the call on your
desktop phone, the remote
destinations stop ringing, are
disconnected, and display a
missed call message.
• When you answer the call on one
remote destination, the other
remote destinations stop ringing,
are disconnected, and a missed
call message is shown on the other
remote destinations.
Using Cisco Extension
Mobility, page 41
If you want to... Then...
Hang up while using the handset Return the handset to its cradle. Or press EndCall.
Hang up while using the headset Press . If you want to keep headset mode activate, press
EndCall.
If you want to... Then... For more information, see...