Cisco 7965G Administration Guide

5-4
Cisco Unified IP Phone 7965G and 7945G Administration Guide for Cisco Unified Communications Manager 6.0
OL-12650-01
Chapter 5 Configuring Features, Templates, Services, and Users
Telephony Features Available for the Phone
Call display
restrictions
Determines the information that will display
for calling or connected lines, depending on
the parties who are involved in the call.
For more information, refer to:
• Cisco Unified
Communications Manager
Administration Guide,
“Cisco Unified
IP Phone
Configuration” chapter.
• Cisco Unified
Communications Manager
System Guide,
“Understanding Route
Plans” chapter.
• Cisco Unified
Communications Manager
Features and Services
Guide, “Call Display
Restrictions” chapter.
Call forward Allows users to redirect incoming calls to
another number (Call Forward All).
For more information, refer to:
• Cisco Unified
Communications Manager
Administration Guide,
“Configuring Directory
Numbers” chapter.
• Cisco Unified
Communications Manager
System Guide, “Cisco
Unified IP Phones” chapter.
Call forward
configurable
display
Allows you to specify information that
appears on a phone when a call is forwarded.
This information can include the caller name,
caller number, redirected number, and
original dialed number.
For more information, refer to:
• Cisco Unified
Communications Manager
Administration Guide,
“Cisco Unified IP Phone
Configuration” chapter.
• Cisco Unified
Communications Manager
System Guide, “Cisco
Unified IP Phones” chapter.
Call forward
destination override
Allows you to override Call Forward All
(CFA) in cases where the CFA target places a
call to the CFA initiator. This feature allows
the CFA target to reach the CFA initiator for
important calls. The override works whether
the CFA target phone number is internal or
external.
For more information, refer to
“Cisco
Unified Communications
Manager System Guide” section,
“Cisco Unified IP Phones”
chapter.
Table 5-1 Telephony Features for the Cisco Unified IP Phone (continued)
Feature Description Configuration Reference

Cisco 7965G Specifications

General

Protocol Support	SIP, SCCP
Weight	3.5 lbs (1.6 kg)
Ethernet	10/100 Mbps
Power	IEEE 802.3af Power over Ethernet (PoE)
Expansion Module Support	Supports up to two Cisco Unified IP Phone Expansion Modules
Speakerphone	Full-duplex speakerphone
Lines	6 lines
Codecs	G.711, G.729a, iLBC