Cisco 7965G Administration Guide

5-11
Cisco Unified IP Phone 7965G and 7945G Administration Guide for Cisco Unified Communications Manager 6.0
OL-12650-01
Chapter 5 Configuring Features, Templates, Services, and Users
Telephony Features Available for the Phone
Malicious caller
identification
(MCID)
(SCCP phones
only)
Allows users to notify the system
administrator about suspicious calls that are
received.
For more information refer to:
• Cisco Unified
Communications Manager
System Guide, “Cisco
Unified IP Phones” chapter.
• Cisco
Unified
Communications
Manager Features and
Services Guide, “Malicious
Call Identification” chapter.
Meet-Me
conference
Allows a user to host a Meet-Me conference in
which other participants call a predetermined
number at a scheduled time.
For more information refer to
Cisco Unified Communications
Manager Administration Guide,
“Meet-Me Number/Pattern
Configuration” chapter.
Message waiting
indicator
A light on the handset that indicates that
indicates that a user has one or more new
voice messages.
For more information refer to:
• Cisco Unified
Communications Manager
Administration Guide,
“Message Waiting
Configuration” chapter.
• Cisco Unified
Communications Manager
System Guide, “Voice Mail
Connectivity to Cisco
Unified Communications
Manager” chapter.
Mobile Connect Enables users to manage business calls using
a single phone number and pick up
in-progress calls on the desktop phone and
mobile phone.
For more information, refer to
the Cisco Unified
Communications Manager
Features and Services Guide,
“Mobile Connect and Mobile
Voice Access” chapter.
Mobile Voice
Access
Extends Mobile Connect capabilities by
allowing users to access an interactive voice
response (IVR) system to originate a call from
a remote device such as a cellular phone.
For more information, refer to
the Cisco Unified
Communications Manager
Features and Services Guide,
“Mobile Connect and Mobile
Voice Access” chapter.
Multilevel
Precedence and
Preemption
(MLPP)
(SCCP phones
only)
Provides a method of prioritizing calls within
your phone system. Use this feature when
users work in an environment where they need
to make and receive urgent or critical calls.
For more information refer to
Cisco Unified Communications
Manager Features and Services
Guide, “Multilevel Precedence
and Preemption” chapter.
Table 5-1 Telephony Features for the Cisco Unified IP Phone (continued)
Feature Description Configuration Reference

Cisco 7965G Specifications

General

Protocol Support	SIP, SCCP
Weight	3.5 lbs (1.6 kg)
Ethernet	10/100 Mbps
Power	IEEE 802.3af Power over Ethernet (PoE)
Expansion Module Support	Supports up to two Cisco Unified IP Phone Expansion Modules
Speakerphone	Full-duplex speakerphone
Lines	6 lines
Codecs	G.711, G.729a, iLBC