Cisco 7965G Administration Guide

6-9
Cisco Unified IP Phone 7965G and 7945G Administration Guide for Cisco Unified Communications Manager 6.0
OL-12650-01
Chapter 6 Customizing the Cisco Unified IP Phone
Automatically Disabling the Cisco Unified IP Phone Screen
Display Idle
Timeout
Length of time that the phone is idle before the display
turns off. Applies only when the display was off as
scheduled and was turned on by an end-user (by pressing a
button on the phone or lifting the handset).
Enter the value in this field in the format hours:minutes.
For example, to turn the display off when the phone is idle
for 1 hour and 30 minutes after an end-user turns the
display on, enter 1:30.
The default value is 0:30.
Display On If
Incoming Call
Disable/enable automatic illumination of the LCD screen
when a call is received.
Default: Disabled
Table 6-1 Display On and Off Configuration Fields (continued)
Field Description

Cisco 7965G Specifications

General

Protocol Support	SIP, SCCP
Weight	3.5 lbs (1.6 kg)
Ethernet	10/100 Mbps
Power	IEEE 802.3af Power over Ethernet (PoE)
Expansion Module Support	Supports up to two Cisco Unified IP Phone Expansion Modules
Speakerphone	Full-duplex speakerphone
Lines	6 lines
Codecs	G.711, G.729a, iLBC