Cisco 8501 G200 Silicon-based Switch Main Board (SMB) (85-G2-64EH-F) is a 51.2T switch card that
includes 64x800G OSFP ports with support for 2x400G optics providing a total of 128x400GbE ports and a
PIE port that supports QSFP28 optics.
Figure 8: Switch Main Board
Ports without dust caps1
The port numbering in SMB row-wise starting from the top (port numbering is from left to right):
• Row 1 (Ports 1, 5, 9, 13, 17, 21, 25, 29, 33, 37, 41, 45, 49, 53, 57, and 61)
• Row 2 (Ports 2, 6, 10, 14, 18, 22, 26, 30, 34, 38, 42, 46, 50, 54, 58, and 62)
• Row 3 (Ports 3, 7, 11, 15, 19, 23, 27, 31, 35, 39, 43, 47, 51, 55, 59, and 63)
• Row 4 (Ports 4, 8, 12, 16, 20, 24, 28, 32, 36, 40, 44, 48, 52, 56, 60, and 64)
PIE port (Punt inject eject)2
Port LEDs3
Note
Port LED from 1-64 are for the OSFP ports and the port LED 65 is for PIE port.
SMB latch4
SCM Slot5
Temperature and Physical Specifications
For temperature and physical specifications, refer to the Physical characteristics table in the Cisco 8100 Series
Routers Data Sheet.
Hardware Installation Guide for Cisco 8500 Switches
8
Cisco 8500 Switch Overview
Temperature and Physical Specifications
To Next Page
Loading...
