Transfer Chassis to a Mechanical Lifting Device
Procedure
Step 1 Place the mechanical lifting device in front of the chassis on the pallet as shown.
Figure 17: Align the Lifting Device in Front of the Chassis on the Pallet
Step 2 Prepare to use the mechanical lifting device by placing a piece of cardboard on the surface of the lift (to
prevent scratching).
Step 3 With at least two or three people move the chassis carefully with the pallet onto the lifting device as shown.
Hardware Installation Guide for Cisco 8500 Switches
27
Unpack and Install the Chassis
Transfer Chassis to a Mechanical Lifting Device
To Next Page
Loading...
