CHAPTER 2
Prepare for Installation
This chapter provides preinstallation information, such as recommendations and requirements that must be
met before installing your switch. Before you begin, inspect all items for shipping damage. If anything appears
to be damaged or if you encounter problems installing or configuring your switch, contact customer service.
The images in this chapter are only for representational purposes, unless specified otherwise. The chassis'
actual appearance and size may vary.
Note
• Standard Warning Statements, on page 11
• Safety Guidelines, on page 14
• Compliance and Safety Information, on page 15
• Laser Safety, on page 15
• Energy Hazard, on page 16
• Preventing Electrostatic Discharge Damage, on page 16
• Installation Guidelines, on page 16
• Procure Tools and Equipment, on page 17
• Prepare Your Location , on page 18
• Prepare Yourself , on page 19
• Prepare Rack for Chassis Installation, on page 20
• Clearance Requirements, on page 21
Standard Warning Statements
This section describes the warning definition and then lists core safety warnings grouped by topic.
Hardware Installation Guide for Cisco 8500 Switches
11
To Next Page
Loading...
