Cisco 8500 - Disconnect Optical Ports from the Network; Maintain Transceivers and Optical Cables

Disconnect Optical Ports from the Network
When you need to remove fiber-optic transceivers, you must first remove the fiber-optic cables from the
transceiver before you remove the transceiver from the port.
Maintain Transceivers and Optical Cables
Refer to Inspection and Cleaning Procedures for Fiber-Optic Connections document for inspection and cleaning
processes for fiber optic connections.
Hardware Installation Guide for Cisco 8500 Switches
69
Connect Switch to the Network
Disconnect Optical Ports from the Network