Cisco 860 Series

REVIEW DRAFT—CISCO CONFIDENTIAL
Contents
5
Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide
OL-16215-11
Connecting the V.92 modem Port 3-8
Connecting a Terminal or PC to the Console Port 3-9
Terminal Emulator Settings 3-10
Connecting a Modem to the Auxiliary Port 3-10
Connecting the 3G Card 3-11
Installing the 3G Adapter for Extended Cable/Antenna 3-17
Connecting a Data BRI Port 3-21
Connecting an FE Line to an FE WAN Port 3-23
Connecting a GE Line to an GE WAN Port 3-24
Connecting an xDSL Line 3-25
Connecting Power over Ethernet 3-27
Connecting the AC Adapter 3-28
Connecting an FXS Line 3-32
Connecting an FXO Line 3-34
Connecting a Voice ISDN BRI Line 3-35
Connecting a Small Form-Factor Pluggable Module 3-37
Safety Warnings 3-37
Installing an SFP Module 3-38
Removing an SFP Module 3-38
Online Insertion and Removal 3-39
Verifying Connections 3-40
CHAPTER 4 Initial Configuration 4-1
Cisco Configuration Professional Express 4-1
Cisco IOS CLI 4-1
Setup Command Facility 4-3
Verifying the Initial Configuration 4-5
Initial Configuration of the Wireless Access Point 4-6
APPENDIX A Technical Specifications A-1
Router Specifications A-2
All Models Except Cisco 860VAE Series A-2
Cisco 860VAE Series A-3
Cisco 860VAE-W-A-K9, Cisco 860VAE-W-E-K9, and Cisco 860VAE-POE-W-A-K9 Series A-4
Power Supply A-5
Wireless Access Point A-5
FE and GE Port Pinouts A-6