Cisco 8821

Procedure
Step 1
Access the Settings app.
Step 2
Select Phone information > Model information.
Model Information
The following table describes the fields and contents in the Phone information > Model information screen.
Table 15: Model Information Fields
DescriptionField Name
Set to CP-8821Model number
MAC address of the phoneMAC address
Firmware version running on the phoneApp load ID
Phone serial numberSerial number
Set to CiscoUSB vendor ID
Set to 8821USB product ID
Remote Network Device Interface Specification
(RNDIS) address of the USB
RNDIS device address
RNDIS for the USBRNDIS host address
Access Firmware Version
The Firmware version menu provides information related to the firmware running on the phone.
Procedure
Step 1
Access the Settings app.
Step 2
Select Phone information > Firmware version.
Firmware Version Information
The following table describes the fields and contents in the Phone information > Firmware version screen.
Cisco Wireless IP Phone 8821 and 8821-EX Administration Guide for Cisco Unified Communications Manager
93
Phone Statistics
View Phone Information