Cisco 8821

Set Up Phone Features for a Group of Phones
Procedure
Step 1
Sign into Cisco Unified Communications Manager Administration as an administrator.
Step 2
Select System > Enterprise Phone Configuration
Step 3
Locate the group of users.
Step 4
Navigate to the Product Specific Configuration Layout pane and set the fields.
Step 5
Check the Override Common Settings check box for any changed fields.
Step 6
Click Save.
Step 7
Click Apply Config.
Step 8
Restart the phones.
Related Topics
Product Specific Configuration Fields, on page 47
Set Up Phone Features for a Single Phone
Procedure
Step 1
Sign into Cisco Unified Communications Manager Administration as an administrator.
Step 2
Select Device > Phone
Step 3
Locate the phone associated with the user.
Step 4
Navigate to the Product Specific Configuration Layout pane and set the fields.
Step 5
Check the Override Common Settings check box for any changed fields.
Step 6
Click Save.
Step 7
Click Apply Config.
Step 8
Restart the phone.
Related Topics
Product Specific Configuration Fields, on page 47
Product Specific Configuration Fields
The following table describes the fields in the Product Specific Configuration Layout pane.
Cisco Wireless IP Phone 8821 and 8821-EX Administration Guide for Cisco Unified Communications Manager
47
Cisco Unified Communications Manager Phone Configuration
Set Up Phone Features for a Group of Phones