Cisco 8821

DescriptionDefaultField Type
Or Choices
Field Name
Specifies the SCEP Server that the phone uses to
obtain certificates for WLAN authentication. Enter
the hostname or the IP address (using standard IP
addressing format) of the server.
String of up to 256
characters
WLAN SCEP Server
Specifies the SHA256 or SHA1 fingerprint of the Root
CA to use for validation during the SCEP process
when issuing certificates for WLAN authentication.
We recommend that you use the SHA256 fingerprint,
which can be obtained via OpenSSL (e.g. openssl x509
-in rootca.cer -noout -sha256 -fingerprint) or using a
Web Browser to inspect the certificate details.
Enter the 64 hexadecimal character value for the
SHA256 fingerprint or the 40 hexadecimal character
value for the SHA1 fingerprint with a common
separator (colon, dash, period, space) or without a
separator. If using a separator, then the separator
should be consistently placed after every 2, 4, 8, 16,
or 32 hexadecimal characters for a SHA256 fingerprint
or every 2, 4, or 8 hexadecimal characters for a SHA1
fingerprint.
String of up to 95
characters
WLAN Root CA
Fingerprint (SHA256 or
SHA1)
Specifies whether the serial console is enabled or
disabled.
DisabledDisabled
Enabled
Console Access
Enables or disables the ability for the phone to learn
MAC addresses from Gratuitous ARP. This capability
is required to monitor or record voice streams.
DisabledDisabled, EnabledGratuitous ARP
Specifies is all calls presented to this phone will be
shown on the primary line or not.
DisabledDisabled
Enabled
Show All Calls on
Primary Line
Indicates whether the phone advertises the G.722 and
iSAC codecs to the Cisco Unified Communications
Manager.
• Use System Default—Defers to the setting
specified in the enterprise parameter Advertise
G.722 Codec.
• Disabled—Does not advertise G.722 to the Cisco
Unified Communications Manager.
• Enabled—Advertises G.722 to the Cisco Unified
Communications Manager.
For more information, see Note 2.
Use System DefaultUse System Default
Disabled
Enabled
Advertise G.722 and
iSAC Codecs
Cisco Wireless IP Phone 8821 and 8821-EX Administration Guide for Cisco Unified Communications Manager
52
Cisco Unified Communications Manager Phone Configuration
Product Specific Configuration Fields