Change voice message indicator setting per line
Procedure
Step 1
On your User Options web page, select User Options > Device.
Step 2
Select a phone from the Name drop-down menu.
Step 3
Select Line Settings.
Step 4
(Optional) If you have more than one directory number (line) assigned to your phone, select a line from the
Line drop-down menu.
Step 5
In the Message Waiting Lamp area, choose from various settings.
Typically, the default message waiting setting prompts your phone to display a steady red light from the
handset light strip to indicate a new voice message.
Step 6
Select Save.
Change audible voice message indicator setting per line
Procedure
Step 1
On your User Options web page, select User Options > Device.
Step 2
Select a phone from the Name drop-down menu.
Step 3
Select Line Settings.
Step 4
If you have more than one directory number (line) assigned to your phone, select a line from the Line drop-down
menu.
Step 5
In the Audible Message Waiting Lamp area, choose from various settings.
Step 6
Select Save.
Change ring type
When the conference station is idle, an incoming call rings uses the idle ring setting. When the conference
station is active, an incoming call rings uses the consecutive ring setting.
Cisco Unified IP Conference Phone 8831 User Guide for Cisco Unified Communications Manager 9.0
75
User Options web pages
Line settings on web
To Next Page
Loading...
Need help?
General
