•
ASR 5500 System Administration Guide
•
Command Line Interface Reference
•
VPC-DI System Administration Guide
•
VPC-SI System Administration Guide
Related Documentation
Revision History
Revision history details are not provided for features introduced before releases 21.2 and N5.5.Note
ReleaseRevision Details
21.3New functionality was added to replace or supplement the configured bulkstats
schema with the option of preserving bulkstats configuration parameters.
New functionality was added to collect bulkstats samples in the SSD. Refer to
Collecting Bulk Statistics Samples in SSD, on page 160 for more information.
The bulkstat Global Configuration Mode command added the config [ schema |
supplement ] keywords to enable this functionality. Refer to Configuring a Separate
Bulkstats Config File, on page 158 for more information.
show configuration bulkstats brief command output was expanded to include all
bulkstats configuration details except for schema.
Pre 21.2First introduced.
Configuring Communication with the Collection Server
Two configuration methods are available for defining how bulk statistics are collected and managed. A
"standard" configuration allows the system to automatically assign a number to the bulk statistics file.
Optionally, a number can be specified by an administrator in the optional configuration method. Command
details and descriptions of keywords and variables for commands in this chapter are located in the Bulk
Statistics Configuration Mode Commands and Bulk Statistics File Configuration Mode Commands chapters
in the Command Line Interface Reference.
Configuring Standard Settings
The configuration example in this section defines basic operation of the bulk statistics feature. Use the following
example configuration to set up the system to communicate with the statistic collection server:
configure
bulkstats mode
schema name format format_string
ASR 5500 System Administration Guide, StarOS Release 21.4
156
Bulk Statistics
Configuring Communication with the Collection Server