Cisco ASR 5500 User Manual

bfd linkagg-peer linkagg_group_id local-endpt-addr local-endpt_ipaddress remote-endpt-addr
remote_endpt_ipaddress interval tx_interval min_rx rx_interval multiplier multiplier_value [ slot
slot_number ]
no bfd linkagg-peer linkagg_group_id [ slot slot_number ]
end
Notes:
•
linkagg_group_id specifies the LAG number as an integer from 1 through 255.
•
local-endpt-addr local-endpt_ipaddress specifies the source address of the multihop BFD session in
IPv4 or IPv6 notation.
•
remote-endpt-addr remote-endpt_ipaddress specifies the remote address of the multihop BFD session
in IPv4 or IPv6 notation.
•
interval tx_interval specifies the transmit interval of control packets in milliseconds as an integer from
50 through 10000.
•
min_rx rx_interval specifies the receive interval of control packets in milliseconds as an integer from
50 through 10000.
•
multiplier multiplier_value specifies the value used to compute hold-down time as an integer from 3
through 50.
•
slot slot_number for redundant active-standby link aggregation, this option specifies the card for which
this configuration is intended.
Saving the Configuration
Save your configuration as described in the Verifying and Saving Your Configuration chapter.
Viewing Routing Information
To view routing information for the current context, run one of the following Exec mode commands;
•
show ip route: Displays information for IPv4 routes in the current context.
•
show ipv6 route: Displays information for ipv6 routes in the current context.
•
show ip static-route: Displays information only for IPv4 static routes in the current contextospf.
•
show ip ospf: Displays IPv4 OSPF process summary information in the current context.
•
show ipv6 ospf: Displays IPv6 OSPFv3 process summary information in the current context.
•
show ip bgp: Displays IPv4 BGP information.
This example shows sample output of the command, show ip route.
[local]host_name# show ip route
"*" indicates the Best or Used route.
Destination Nexthop Protocol Prec Cost Interface
*44.44.44.0/24 208.230.231.50 static 1 0 local1
*192.168.82.0/24 0.0.0.0 connected 0 0
*192.168.83.0/24 0.0.0.0 connected 0 0
208.230.231.0/24 0.0.0.0 ospf 110 10 local1
ASR 5500 System Administration Guide, StarOS Release 21.4
296
Routing
Viewing Routing Information

Cisco ASR 5500 Specifications

General

Brand	Cisco
Model	ASR 5500
Category	Network Router
Language	English