Cisco ASR 5500 User Manual

Description/NotesTaskQues.
File Transfer Protocol (FTP) uses TCP port number
21 by default, if enabled.
Note: For maximum system security, do not enable
FTP.
Note: in release 20.0 and higher Trusted StarOS
builds, FTP is not supported.
Enable FTP access to the system.25
1
Enter the number of the prompt to be modified.
2
Configure the parameter.
3
Optional. Repeat step 1 and step 2 to modify
additional settings.
4
Enter "done" when you have completed all
changes.
Review and/or modify the configuration of
previous prompts.
—
An example of a created script is displayed in the
example below. Variables are displayed in italics
(variable).
Review the configure script created by the
wizard based on your inputs.
—
Once applied, the parameter configuration is
automatically saved to the system.cfg file stored in
MIO/UMIO/MIO2 flash memory.
Apply the configuration file to the system.
—
Do you want to view the configuration script created[yes/no]: y
config
system hostname hostname
context local
administrator admin_name password passwd
interface mio1
ip address ip_address subnet
#exit
ip route 0.0.0.0 0.0.0.0 gw_address mio1
ssh key v1_key
ssh key v2_rsa_key
ssh key v2_dsa_key
server sshd
subsystem sftp
#exit
no server telnetd
no server ftpd
#exit
port ethernet 5/1
bind interface mio1 local
no shutdown
#exit
end
Do you want to apply configuration script created[yes/no]:
ASR 5500 System Administration Guide, StarOS Release 21.4
21
Getting Started
The Quick Setup Wizard

Cisco ASR 5500 Specifications

General

Brand	Cisco
Model	ASR 5500
Category	Network Router
Language	English