Cisco ASR 9000 User Manual

35
Cisco ASR 9000 Series Aggregation Services Router Getting Started Guide
OL-28417-02
Chapter Bringing Up Cisco IOS XR Software on the Router
Firmware Upgrade
Active node reload "Cause: Turboboot completed successfully"
Standby node reload "Cause: self-reset to use new boot image"
show environment Command: Example
To display environmental monitor parameters for the system, use the show environment command in
EXEC or administration EXEC mode. The show environment [options] command syntax is used.
Enter the show environment ? command to display the command options.
RP/0/RSP0/CPU0:router# show environment temperatures
The following example shows temperature information for a Cisco ASR 9000 Series Router.
Mon May 31 02:44:19.989 DST
R/S/I Modules Inlet Hotspot
Temperature Temperature
(deg C) (deg C)
0/1/*
host 36.1 45.1
0/RSP0/*
host 30.8 41.5
0/4/*
host 34.4 44.5
0/6/*
host 37.3 47.9
The following example shows LED status of the nodes in a Cisco ASR 9000 Series Router.
RP/0/RSP0/CPU0:router# show environment leds
Mon May 31 02:46:17.343 DST
R/S/I Modules LED Status
0/RSP0/*
host Critical-Alarm Off
host Major-Alarm Off
host Minor-Alarm Off
host ACO Off
host Fail Off
For more information, see Cisco ASR 9000 Series RouterInterface and Hardware Component Command
Reference document.
Firmware Upgrade
The field-programmable devices (FPDs) are hardware devices implemented on router cards that support
separate software upgrades. A field-programmable gate array (FPGA) is a type of programmable
memory device that exists on most hardware components of the router. The term FPD is introduced to

Cisco ASR 9000 Specifications

General

Brand	Cisco
Model	ASR 9000
Category	Network Router
Language	English