Name: Cisco ASR 9000
Brand: Cisco
Rating: 5 (1 reviews)

To Next Page

To Previous Page

Cisco ASR 9000 Series Aggregation Services Router Getting Started Guide

OL-28417-02

Chapter Configuring Additional Router Features

Configuring Telnet, HTTP, and XML Host Services

Examples

The following example shows how the domain name and DNS are configured:

RP/0/RSP0/CPU0:router# configure

RP/0/RSP0/CPU0:router(config)# domain name cisco.com

RP/0/RSP0/CPU0:router(config)# domain name-server 10.1.1.1

RP/0/RSP0/CPU0:router(config)# commit

RP/0/RSP0/CPU0:router(config)# end

RP/0/RSP0/CPU0:router# show hosts

Default domain is cisco.com

Name/address lookup uses domain service

Name servers: 10.1.1.1

Related Documents

Configuring Telnet, HTTP, and XML Host Services

For security reasons, some host services are disabled by default. You can enable Host services, such as

Telnet, XML, and HTTP by using the commands described in this section. Host services provide the

following features:

• Enabling the Telnet server allows users to log in to the router using IPv4 or IPv6 Telnet clients.

• Enabling the XML agent enables XML Common Object Request Broker Architecture (CORBA)

agent services so that you can manage and configure the router using an XML interface.

Prerequisites

Ensure the following prerequisites are met before configuring Telnet, HTTP, and XML host services:

• For the XML and HTTP host services, the Manageability package must be installed and activated

on the router.

• To enable the Secure Socket Layer (SSL) of the HTTP and XML services, the security package must

be installed and activated on the router.

See the Cisco ASR 9000 Series Aggregation Series Router System Management Configuration Guide for

information on installing and activating packages.

Step 5

show hosts

Example:

RP/0/RSP0/CPU0:router(config)# show hosts

Displays all configured name servers.

Command or Action Purpose

Cisco ASR 9000 User Manual

Questions and Answers: