Cisco ASR 9000 User Manual

82
Cisco ASR 9000 Series Aggregation Services Router Getting Started Guide
OL-28417-02
Chapter Configuring Additional Router Features
Configuring Telnet, HTTP, and XML Host Services
Note This process enables the Telnet, HTTP, and XML host services on the Management Ethernet interfaces.
For more information on how to enable these services on other inband interfaces, see the Cisco ASR 9000
Series Aggregation Services Router System Security Configuration Guide.
SUMMARY STEPS
1. configure
2. interface MgmtEth interface-path-id
ipv4 address ipv4-address subnetmask
3. ipv4 virtual address ipv4-address subnetmask
4. end or commit
5. exit
6. configure
7. telnet {ipv4 | ipv6} server max-servers limit
8. http server
9. xml agent
10. end or commit
DETAILED STEPS
Command or Action Purpose
Step 1
configure
Example:
RP/0/RSP0/CPU0:router# configure
Enters global configuration mode.
Step 2
interface MgmtEth interface-path-id
ipv4 address ipv4-address subnetmask
Example:
Active RP
RP/0/RSP0/CPU0:router(config)# interface
MgmtEth0/RP0/CPU0/0
RP/0/RSP0/CPU0:router(config-if)# ipv4 address
172.29.52.75 255.255.255.0
RP/0/RP0/CPU0:router(config-if)# no shut
RP/0/RP0/CPU0:router(config-if)# exit
Standby RP
RP/0/RSP0/CPU0:router(config)# interface
MgmtEth0/RP1/CPU0/0
RP/0/RSP0/CPU0:router(config-if)# ipv4 address
172.29.52.76 255.255.255.0
RP/0/RSP0/CPU0:router(config-if)# no shut
RP/0/RSP0/CPU0:router(config-if)# exit
Configures the Management Ethernet ports on the active
and standby RPs.

Cisco ASR 9000 Specifications

General

Brand	Cisco
Model	ASR 9000
Category	Network Router
Language	English