Cisco ASR 9000 User Manual

46
Cisco ASR 9000 Series Aggregation Services Router Getting Started Guide
OL-28417-02
Chapter Configuring General Router Features
User Access Privileges
Task: cef : READ WRITE EXECUTE DEBUG
Task: cgn : READ WRITE EXECUTE DEBUG
Task: cisco-support : READ WRITE EXECUTE DEBUG (reserved)
Task: config-mgmt : READ WRITE EXECUTE DEBUG
Task: config-services : READ WRITE EXECUTE DEBUG
Task: crypto : READ WRITE EXECUTE DEBUG
Task: diag : READ WRITE EXECUTE DEBUG
Task: drivers : READ WRITE EXECUTE DEBUG
Task: dwdm : READ WRITE EXECUTE DEBUG
Task: eem : READ WRITE EXECUTE DEBUG
Task: eigrp : READ WRITE EXECUTE DEBUG
Task: ethernet-services : READ WRITE EXECUTE DEBUG
show user group Command: Example
To display the user groups assigned to your user account, enter the show user group command:
RP/0//CPU0:router# show user group
Mon May 31 02:53:59.933 DST
root-system, cisco-support
show user all Command: Example
To display all user groups and task ID information for your account, enter the show user all command:
RP/0//CPU0:router# show user all
Mon May 31 02:54:51.446 DST
Username: cisco
Groups: root-system, cisco-support
Authenticated using method local
User cisco has the following Task ID(s):
Task: aaa : READ WRITE EXECUTE DEBUG
Task: acl : READ WRITE EXECUTE DEBUG
Task: admin : READ WRITE EXECUTE DEBUG
Task: ancp : READ WRITE EXECUTE DEBUG
Task: atm : READ WRITE EXECUTE DEBUG
Task: basic-services : READ WRITE EXECUTE DEBUG
Task: bcdl : READ WRITE EXECUTE DEBUG
Task: bfd : READ WRITE EXECUTE DEBUG
Task: bgp : READ WRITE EXECUTE DEBUG
Task: boot : READ WRITE EXECUTE DEBUG
Task: bundle : READ WRITE EXECUTE DEBUG
Task: cdp : READ WRITE EXECUTE DEBUG
Task: cef : READ WRITE EXECUTE DEBUG
Task: cgn : READ WRITE EXECUTE DEBUG
Task: cisco-support : READ WRITE EXECUTE DEBUG (reserved)
Task: config-mgmt : READ WRITE EXECUTE DEBUG
Task: config-services : READ WRITE EXECUTE DEBUG
Task: crypto : READ WRITE EXECUTE DEBUG
Task: diag : READ WRITE EXECUTE DEBUG
show aaa usergroup Command: Example
To display the rights assigned to a user group, enter the show aaa usergroup group-name command:
RP/0//CPU0:router# show aaa usergroup root-system
Mon May 31 02:56:45.975 DST
User group 'root-system'
Inherits from task group 'root-system'
User group 'root-system' has the following combined set
of task IDs (including all inherited groups):

Cisco ASR 9000 Specifications

General

Brand	Cisco
Model	ASR 9000
Category	Network Router
Language	English