Cisco ASR 9010 Installation Guide

Check the resistance value of the ESD-preventive strap periodically. The measurement should be between 1
and 10 megohms.
Note
Before you perform any of the procedures in this guide, attach an ESD-preventive strap to your wrist and
connect the leash to the chassis as shown in the figures below.
Figure 1: ESD Label Information on Router Chassis
Figure 2: ESD Label Information on Cisco ASR 9910 Router Chassis
Figure 3: Connecting an ESD-Preventive Wrist Strap to the Cisco ASR 9010 Router Chassis
Cisco ASR 9000 Series Aggregation Services Router Hardware Installation Guide
3
Preparing for Installation
Preventing Electrostatic Discharge Damage

Cisco ASR 9010 Specifications

General

Chassis	Modular
Rack Units	21 RU
Operating System	Cisco IOS XR
Form Factor	Rack-mountable
Number of Slots	10
Power Supply	AC or DC
Redundancy	Yes
Slots	8 line card slots, 2 route switch processor slots
Memory	16 GB DRAM
Storage	64 GB SSD (Route Processor)
Port Types	Ethernet, OTN
Redundancy Features	Route Processor, Power Supply, Fan Tray
Operating Temperature	32 to 104°F (0 to 40°C)
Humidity	5% to 90% non-condensing
Route Processor	Cisco ASR 9000 Series Route Switch Processor